Batch Report Server/400 Upgrade

From Support

If you have a question or seek clarification, please call Technical Support.

Use the following instructions for your Batch Report Server/400 upgrade.

If you encounter any problems, please contact Technical Support

This upgrade will bring Batch Report Server/400 to version 1.52 For help finding what version you are currently at, please read the FAQ

Contents 1 Step 1: Back up old library 2 Step 2: Download 3 Step 3 Install 4 Step 4: Copy DTAARAs 5 Step 5: License 6 Step 6: Clean up 7 Step 7: Finish

Step 1: Back up old library

RNMOBJ OBJ(QSYS/RJSBCH) OBJTYPE(*LIB) NEWOBJ(RJSBCHV1)

Step 2: Download

Download Batch Report Server/400 from RJS.

Username = *********
Password = ***********

Step 3 Install

Use FTP Library Installation to install Batch Report Server/400 library (RJSBCH) onto the System i.

Unzip the file to the default location.

Enter your System i IP Address, username and password.

Take each numbered step, waiting until the previous step is finished before continuing.

You will see an Error 550. This is normal behavior. If you see any additional errors please contact Technical Support.

ADDLIBLE RJSBCH

Step 4: Copy DTAARAs

Use the following command to copy the old DTAARA's and all the users tables to the new library

BCHUPG RJSBCHV1 RJSBCH

Step 5: License

If necessary, enter new license codes.

Step 6: Clean up

Remove the Batch Report Server/400 library

RMVLIBLE RJSBCH

Step 7: Finish

Batch Report Server/400 should now be completely upgraded.