RJSCONVERT Upgrade

From Support

If you have a question or seek clarification, please call Technical Support.

Use the following instructions for your RJSCONVERT upgrade.

If you encounter any problems, please contact Technical Support

This upgrade will bring RJSCONVERT to version 1.53 For help finding what version you are currently at, please read the FAQ

Contents 1 Step 1: Back up old library 2 Step 2: Download 3 Step 3 Install 4 Step 4: Copy DTAARAs 5 Step 5: Clean up

Step 1: Back up old library

If you have no object locks on the library, you can simply rename it:

RNMOBJ OBJ(QSYS/RJSCONVERT) OBJTYPE(*LIB) NEWOBJ(CONVERTOLD)

Otherwise, a copy library command will work as well:

CPYLIB FROMLIB(RJSCONVERT) TOLIB(CONVERTOLD)

Step 2: Download

Download RJSCONVERT from RJS.

Username = *********
Password = ***********

Step 3 Install

Use FTP Library Installation to install RJSCONVERT library (RJSCONVERT) onto the System i.

Unzip the file to the default location.

Enter your System i IP Address, username and password.

Take each numbered step, waiting until the previous step is finished before continuing.

You will see an Error 550. This is normal behavior. If you see any additional errors please contact Technical Support.

ADDLIBLE RJSCONVERT

Step 4: Copy DTAARAs

Use the following command to copy the old DTAARA's and all the users tables to the new library

CNVUPG CONVERTOLD RJSCONVERT

Step 5: Clean up

Remove the RJSCONVERT library

RMVLIBLE RJSCONVERT

RJSCONVERT should now be completely upgraded.

This article has been proofread by Jordan as of 14:15, 23 April 2009 (CDT)